Delkron Twin Ca User Manual
Page 2
Delkron manufactures it’s cylinders to a stock length spec 4.937” unless
customer makes arrangements for a custom length.
It is common for a Twin Cam piston to be .005” to .015” below deck and if
using a .020” base gasket you may need to deck the cylinder as much as
.035” to achieve .000” deck. All machine work should be done by a qualified
machinist.
It is the sole responsibility of the assembler to ensure the cylinders are clean,
the ring end gaps are set per piston manufacturers instructions and all
clearances are checked before final assembly. If you are not confident of your
skill level please let a qualified professional do the work. Failure to follow
cleaning and assembly instructions will void any warranty claims.
Delkron
8090 Auburn Rd
Concord, OH 44077
866-335-5766 Phone Toll Free
61713 CTC4250-IS