Delkron 103" Hop Up Kit - Manual (Page 5)

CAUTIO !
Rotating the engine with the valve train loaded can result in bent pushrods or
valve damage.
N. If using adjustable pushrods; adjust pushrods as per the manufacturer’s
instructions.
O. Install the two breather cover and baffle bolts. Alternately tighten bolts to 90-120
in/lbs.
P. Install a new rocker cover gasket and place rocker cover in position, making sure
that all the holes are in alignment.
Q. Apply a small amount of medium strength threadlocker 242/243 (blue) to the
threads of the six rocker cover bolts. Start the cover bolts, the three short bolts on
the left side of the engine, three long bolts on the right. Torque bolts to 9-12 ft/lbs.
using the pattern shown in the appropriate service manual.
R. Finish final assembly as per service manual.
S. HAVE FU !
THANK YOU FOR CHOOSING DELKRO I C. FOR YOUR HIGH
PERFORMANCE ENGINE NEEDS