Denon AVR-788 - Manual (Page 33)

ENGLISH
g Quick Select Name
Change the Quick Select name.
Up to 15 characters can be input.
[Input characters]
A ~ Z a ~ z 0 ~ 9 ! # % & ’ ( ) * + , - . / : ; = ” ? @ [ \ ] (space)
h Remote ID Setup
Set remote control ID.
[Selectable items] 1 2 3 4
j Display
Adjust display brightness of the receiver.
Operating from the main unit and remote
control unit
Press the DIMMER button.
Bright Dim
Dark OFF
[Selectable items]
Bright
: Normal display brightness.
Dim
: Reduced display brightness.
Dark
: Very low display brightness.
OFF
: Display is off unless controls are operated.
0
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
NOTE
When using the AVR-788 with only the included remote control unit
(RC-1077), there is no need to make settings.
k Setup Lock
Protect settings from inadvertent change.
• When “Setup Lock” is set to “ON”, the settings listed below can
no longer be changed. Also, “SETUP LOCKED!” is displayed if you
attempt to operate related buttons.
⋅ Menu operations
⋅ RESTORER
⋅ Night Mode
⋅ Parameter
⋅ Room EQ
⋅ Channel Level
⋅ Audio Delay
• To cancel the setting, press the MENU button to re-display the “Setup
Lock” screen, then change the setting to “OFF”.
[Selectable items]
ON
: Turn protection on.
OFF
: Turn protection off.
1.AVR788E3_ENG_108.indd 33 2007/10/05 16:22:15