Denon AVR-788 - Manual (Page 31)

ENGLISH
Zone2 Setup
Make settings for audio playback in a ZONE2 system.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone2 Setup
5.Option Setup
3.Audio Setup
a Lch Level
Adjust the left channel output level.
2-4.Zone2 Setup
Level Lch : 0dB
Rch : 0dB
Vol.Limit : OFF
Power On Lev.: Last
Mute Lev. : Full
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
[Selectable items]
Last
: Use the memorized setting from the last session.
– – –
: Always use the muting on condition when power
is turned on.
–70dB ~ +18dB
: Set the volume level when the power is turned on
in units of 1 dB.
[Selectable items]
Full
: The sound is cut off entirely.
–40dB
: The sound is attenuated by 40 dB.
–20dB
: The sound is attenuated by 20 dB.
[Variable range] –12dB ~ 0dB ~ +12dB
[Variable range] –12dB ~ 0dB ~ +12dB
s Rch Level
Adjust the right channel output level.
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
d Volume Limit
Make a setting for maximum volume.
f Power On Level
Define the volume setting that is active when the power is turned
on.
g Mute Level
Set the amount of attenuation when muting is on.
Option Setup
Make various other settings.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone2 Setup
5.Option Setup
3.Audio Setup
a Amp Assign
Define how the amplifier for the surround back speaker channels
is used.
The places where the surround back amplifier are used can be set
freely according to the usage environment. This makes it possible to
output sound to rooms other than the room (the main zone) where
surround playback is performed (multi-zone playback) or play the sound
with high quality using the front speakers (bi-amp connections).
[Selectable items]
7.1ch ZONE2 FrontA Bi-Amp FrontB Bi-Amp 2ch
For details, see “Amp Assign / Multi-zone Connections and Operations”
(vpage 52 ~ 54).
2.Vol.Control
3.Source Delete
4.On-Screen Display
5.Quick Select Name
6.Remote ID Setup
7.Display
8.Setup Lock
1.Amp Assign
2-5.Option Setup
1.AVR788E3_ENG_108.indd 31 2007/10/05 16:22:14