DaySequerra UpMix - Manual (Page 10)

8
UpMix User Manual
Front Panel Meters
INPUT LEVELS - Six 10-segment multi-colored LED meters display the audio level for each channel of
the inbound audio stream.
OUTPUT LEVELS - Six 10-segment multi-colored LED meters display the audio level for each channel
of the up-mixed audio stream.
Status Indicators
AES LOCK - Green LED indicator illuminates when UpMix has acquired a valid
AES3 digital input signal.
AES ERROR - Red LED indicator illuminates when UpMix has lost or has
received an invalid AES3 digital input signal.
FAULT - Red LED indicator illuminates when UpMix has discovered a fault.
The fault will be displayed on the home screen, or may be viewed under the
DIAGNOSTICS menu. Fault text may be removed from the home screen by
pressing the ENTER key.
7.1 MODE - Blue LED indicator illuminates when UpMix is producing a 7.1 channel stream.
Display and Controls
VACUUM FLUORESCENT DISPLAY - A Multi-function display will indicate current operating status of
the unit and programming menus.
SELECTION KNOB - A stepping rotational knob is used to select values while in the menu system. To
enter the menu, simply rotate the knob in any direction while UpMix is on the HOME screen.
ENTER KEY - Used to enter a menu or confirm a selection. This key will also clear a FAULT display
from the home screen.
HOME KEY - A press of this button will return UpMix to its home screen.
BACK KEY – While on the HOME screen, this key will re-display the FAULT status text if it has been
cleared. A press of this key will return to a previous menu, or if you are entering a value, exit the field
and return the value to the last programmed state.