DaySequerra UpMix - Manual (Page 9)

9
x r al
Fr o n t Pa n e l
Ba r g r a p h M e t e r s
INPUT LEVELS - Six 10-segment multi-colored LED meters display the audio level for each channel of
the inbound audio stream.
OUTPUT LEVELS - Six 10-segment multi-colored LED meters display the audio level for each channel
of the up-mixed audio stream.
St a t u s In d ica t o r s
Alarm - Red
Led
indicator
illuminates
when
Mono2Stereo
has
an
active
alarm
condition
or
discovered
a
fault.
An
error
message
will
be
displayed
on
the
VFD
display.
AES Lock -
Green
LED
indicator
illuminates
when
Mono2Stereo
has
acquired
a
valid
AES3
digital
input
signal.
7.1 MODE - Blue LED indicator illuminates when UpMix is operating in 7.1
channel output mode.
GPIO -
Green
LED
indicator
illuminates
when
Mono2Stereo
is
using
any
of
the
general
purpose
input
/
outputs.
Disp la y a n d Co n t r o ls
VACUUM FLUORESCENT DISPLAY - A multi-function display that indicates current operating status
of the unit and programming menus.
ROTARY ENCODER - A stepping optical rotary encoder is used to select values while in the menu
system. To enter the menu, simply rotate the rotary encoder in any direction while UpMix is on the
HOME screen.
ENTER KEY - Used to enter a menu or confirm a selection. This key will also clear an error message
display from the home screen.
HOME KEY - A press of this button will return UpMix to its home screen, or enter home screen
selection mode.
BACK KEY – A press of this key will return to a previous menu, or if you are entering a value, exit the
field and return the value to the last programmed state.