Danby DBC434A1BSSDD - Manual (Page 9)

CONTROLS OF YOUR
BEVERAGE CENTER
SETTING THE
TEMPERATURE
• To switch the display between the Fahrenheit (°F) and Celsius (°C)
scale, depress the UP and DOWN control buttons
simultanously for approximately five (5) seconds
• The temperature range can be set as low as 39°F (4°C) or as high
as 64°F (18°C) to suit your specific storage requirements. Each
depression of the UP
or DOWN button will allow you to adjust
the temperature in 1° degree increments within the aforementioned
range.
I M P O R T A N T !
In the event of a power fail-
ure, wait 3 to 5 minutes
before restarting.
1
2 3
4
5
6
1. Indicator light illuminates to signify the
cooling mode is currently in operation.
2. Set Temperature Display: Display screen
shows the temperature setting (see ‘Setting
the temperature’ below)
3. Cabinet Temperature Display:
Display screen shows the current cabinet
temperature.
4. °C/°F : Adjacent indicator light denotes which
scale of temperature is displayed.
5. ‘ ’ Button: Used to raise the temperature
(warmer) in 1° degree increments.
‘ ’ Button: Used to decrease the
temperature (cooler) in 1° degree increments.
6. ‘||’ Switch: Continuous illumination.
‘O’ Switch: Illumination only when the door is open.
Operating Instructions
7