Dahua Technology LE-A - Manual (Page 113)

113
Figure 7-50
Please refer to the following sheet for detailed information.
Parameter Function
Event
Type
z
The abnormal events include: no disk, no space, disk error, net error.
z You need to draw a circle to enable this function.
Normal
Out The corresponding alarm activation output channel when alarm occurs,
There are three channels.
Latch The alarm output can delay for the specified time after alarm stops.
Then system disables alarm and corresponding activation output.
The value ranges from 10s to 300s.
Send
email If you enable this function, system can send out email to alarm the
specified user.
Alarm
upload System can upload the alarm signal to the network (includes the alarm
centre.)
Show
message System can display alarm information in local DVR screen.
7.3.4 Additional
Function
7.3.4.1 DNS
Here you can set server or local operator DNS address. See
X478H478H478H482H
Figure 7-51
X
.