Configuring zero clients for vm connections – ClearCube ClientCube 2 with KM User Manual
Page 12
Page 12 of 14
P/N G0200161 Rev F, 1.5.01.19.2015
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
Configuring Zero Clients for VM Connections,
Continued
Configure zero
client
(continued)
Step
Action
7
Click the Apply button located at the bottom of the screen. A success message is
displayed.
8
To restart the zero client, click Diagnostics > PCoIP Processor and then click
Reset. A message is displayed. Click OK.
This ends the PCoIP session with the zero client. Repeat this procedure for all
zero clients in the ClientCube 2.
This manual is related to the following products: