Cino PL680BT HC - Manual (Page 7)

5
Pair Android Device via HID Mode with Passkey
Visual Signal Acoustic Signal Screen
Step
status indicator link indicator
1.
Power on the scanner within Bluetooth
coverage of your Android device.
2.
Scan the ”Uninstall” command listed
below.
blinks red and
green alternatively
3.
Enable the Bluetooth ® function of your
Android device to search Bluetooth device
(here, it is CINO’s scanner).
For this procedure please refers to the
User Manual of your Android device.
4.
Scan “HID Mode with Passkey”
command
During the
pairing: blinks
blue 3 times per 2
Sec.
5.
The scanner will be discovered by and
shown as ”xxxxBT-xxxx” or
“PxxxxBT-xxxx” on the discovered
Bluetooth device list on your Android
device.
6.
Tap ”xxxxBT-xxxx” or
“PxxxxBT-xxxx”, a message that shows
a pin code and asks you to enter it
accordingly by scanning Numeric Option
Codes and then the “FIN” command
listed below.
7. The pairing is successful.
blinks blue 1 time
per 2.5 sec. 4 beeps in
ascending tone
8.
Launch any data editor App or function on
your Android device and scan a barcode to
verify the pairing is successful.