Cino PL680BT HC - Manual (Page 5)

3
Pair Android Device via HID Legacy Mode
Visual Signal Acoustic Signal Screen
Step
status indicator link indicator
1.
Power on the scanner within Bluetooth
coverage of your Android device.
2.
Scan the ”Uninstall” command listed
below. blinks red and
green alternatively
3.
Enable the Bluetooth ® function of your
Android device to search Bluetooth device
(here, it is CINO’s scanner).
For this procedure please refers to the
User Manual of your Android device.
4. Scan “HID Legacy Mode” command.
During the
pairing: blinks
blue 3 times per 2
Sec.
5.
The scanner will be discovered by and
shown as ”xxxxBT-xxxx” or
“PxxxxBT-xxxx” on the discovered
Bluetooth device list on your Android
device.
6.
Tap the ”xxxxBT-xxxx” or
“PxxxxBT-xxxx” to pair the scanner
with your Android device.
7. The pairing is successful.
blinks blue 1 time
per 2.5 Sec. 4 beeps in
ascending tone
8.
Launch any data editor App or function on
your Android device and scan a barcode to
verify the pairing is successful.
Note: If your Android device prompts any message or direction not mentioned above, please confirm or follow it.