Denon AVR-3808 - Manual (Page 9)

- 9 -
COMMAND and PARAMETER list
COMMAND PARAMETER function example
PW ON POWER ON/STANDBY change PWON
STANDBY PWSTANDBY
? Return PW Status PW?
MV UP MASTER VOLUME UP/DOWN , direct change to **dB MVUP
DOWN MVDOWN
** **:00 to 99 by ASCII , 80=0dB, 99=---(MIN) MV80
? Return MV Status MV?
CV FL UP CHANNEL VOLUME UP/DOWN , direct change to **dB CVFL UP
FL DOWN ---FRONT Lch CVFL DOWN
FL ** **:38 to 62 by ASCII , 50=0dB CVFL 50
FR UP CVFR UP
FR DOWN ---FRONT Rch CVFR DOWN
FR ** **:38 to 62 by ASCII , 50=0dB CVFR 50
C UP CVC UP
C DOWN ---CENTERch CVC DOWN
C ** **:38 to 62 by ASCII , 50=0dB CVC 50
SW UP CVSW UP
SW DOWN ---SUBWOOFERch CVSW DOWN
SW ** **:00,38 to 62 by ASCII , 50=0dB,00=OFF CVSW 50
SL UP CVSL UP
SL DOWN ---SURROUND Lch CVSL DOWN
SL ** **:38 to 62 by ASCII , 50=0dB CVSL 50
SR UP CVSR UP
SR DOWN ---SURROUND Rch CVSR DOWN
SR ** **:38 to 62 by ASCII , 50=0dB CVSR 50
SBL UP ---SURROUND BACK Lch (SBch 2SP) CVSBL UP
SBL DOWN CVSBL DOWN
SBL ** **:38 to 62 by ASCII , 50=0dB CVSBL 50
SBR UP ---SURROUND BACK Rch (SBch 2SP) CVSBR UP
SBR DOWN CVSBR DOWN
SBR ** **:38 to 62 by ASCII , 50=0dB CVSBR 50
MV, CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section)