Bimba ITM-23Q IntelliMoto User Manual
Page 2
CONTENTS
Step 3
Form QSG-ITM-23Q-020D
Bimba Manufacturing Company
P.O. Box 68 Monee, Illinois 60449-0068
Phone: 708-534-8544 Toll Free: 800-44-BIMBA Fax: 708-235-2014
Email: [email protected] www.bimba.com
For complete information, refer to Bimba IntelliMotor
®
ITM-23Q Hardware Manual. If you have any questions or com-
ments, please call Bimba Customer Support: 800.442.4622, or visit us online at www.bimba.com.
a)
Apply power to the drive. The drive model and firmware revision should
be automatically displayed. If they are not, check the com port setting.
b)
Follow the configuration instructions in the IQ
®
stepper help screens.
The IQ
®
stepper software can be used to set up your drive to operate in
several different modes including: Pulse & Direction, Analog Velocity,
IQ
®
Programmer, and SCL.
c)
IQ
®
stepper includes a self test option (under the Drive menu) to
verify that the ITM and power supply are correctly wired and configured.
Recommended RS-485 Adapter
USB-COMi-M (P/N 8500-003) or equivalent
•
Not available from Bimba;
•
Converts RS-422 and RS-485 to USB
For four wire RS-485, set SW2 to OFF and SW1,3,4 to ON. On the
USB-COMi-M screw terminal connector:
•
Connect pin 1 to RX-
•
Connect pin 2 to RX+
•
Connect pin 3 to TX+
•
Connect pin 4 to TX-
•
Connect pin 6 to GND
•
The DB-9 connector is not used
1
ON
2 3 4
4 Wire
RS-485