User password, Save & exit, Save changes and reset – Avalue EQM-A50M User Manual

Page 40

EQM-A50M

40 EQM-A50M User

’s Manual

3.6.5.2 User Password

This setting specifies a password that must be entered to access the BIOS Setup Utility or

to boot the system. If only the User's password is set, then this is a power on password and

must be entered to boot or enter the BIOS setup program. In the BIOS setup program, the

User will have Administrator rights. By default, no password is specified.

3.6.6

Save & Exit

3.6.6.1 Save Changes and Reset

Any changes made to BIOS settings are stored in NVRAM. The setup program then exits

and reboots the controller.