Avalue LPC-1005 - Manual (Page 13)

Quick Reference Guide
LPC 10 ”/12” Series Quick Reference Guide 13
Follow these steps to install the wall mounting arm:
1. Place the wall mounting arm onto the back of panel PC.
2. Insert the 4 screws into the holes and tighten. Line up the holes of the arm with the holes of panel PC.
3. Reconnect the cables. Refer to the user ’s manual of the optional wall mounting arm to attach it to the wall.
Note: 75mmx75mm VESA hole(n=4), M4, pitch=0.5mm, deep=4mm. Due to safety concerns, if
the VESA mounting kit is purchased separately, please make sure the mounting kit is
UL-Listed.
M4*4