Avalue ERS-BYTE-10COM - Manual (Page 6)

ERS-BYTE
6 ERS-BYTE Quick Reference Guide
1.3 System Specifications
System
Board
 EBM-BYTS + AUX-M03
CPU  Intel® Celeron® J1900 2.0GHz Processor
BIOS  AMI uEFI BIOS, 64Mbit SPI Flash ROM
I/O Chip  EC ITE IT8528E
System Memory  1 x 204-Pin DDR3L 1333MHz SO-DIMM Socket Up to 8GB
Watchdog Timer  H/W Reset, 1sec. ~ 65535sec.
H/W Status Monitor
 Monitoring CPU & System Temperature and Voltage
Storage
Solid State Drive 
1 x 2.5” Drive Bay, 1 x mSATA
External I/O
COM Port
 10 x RS-232 (COM1~COM4 can be set as 422/485 by BIOS);
COM3~COM10 supported 2.5KV Isolation
USB Port  5 x USB
Video Port  1 x VGA, 1 x LVDS
Audio Port  1 x Mic-In, 1 x Line-Out, 1 x Line-In
LAN Port
 1 x RJ45
GPIO  6-bit GPI & 6-Bit GPO
Switch  1 x Power on/off
Indicator Light
 1 x Power on/off LED
 1 x Storage LED
Expansion Slots  2 x Mini PCIe (1 x mSATA supported)
Display
Chipset
 Intel® Valleyview SoC integrated Graphics
Multiple Display  VGA
Resolution  VGA Mode: 2560 x 1080 @ 60Hz
Audio
HD Code  Realtek ALC892
Audio Interface  Mic-in, Line-in, Line-out
Ethernet
Chipset  Intel® I211AT Gigabit Ethernet Controller
Ethernet Interface  10/100/1000 Base-Tx Gigabit Ethernet Compatible
Environment & Mechanical
Power Type  +12 ~ +26Vdc (Lockable DC Jack)
ACPI
 Single Power ATX Support S0, S3, S4, S5
 ACPI 5.0 Compliant