Q-See QSD2216 User Manual

Page 24

5.5.2. MAC SET

When the cursor moves to Mac Set then press the Enter button, the Mac Set window will appear.

If you have more than one DVR in a local area network, you have to set each DVR to have an

exclusive MAC address, but remember that you have only one chance to modify the MAC

address, once you have changed the MAC address, this menu will not appear again. If you want

to change the MAC address again, please load the factory set, then you can change the MAC

address. For MAC address, you’d better set the first two bytes to “00 00”, and change other bytes.

5.6 SENSOR SETUP

When the cursor moves to Sensor Set, then press the Enter button, the sensor setup window will

appear. Press UP or DOWN button to move the cursor. Press LEFT or RIGHT to change the

value.