Avalue EAX-Q77 - Manual (Page 20)

EAX-Q77 User’s Manual
20 EAX-Q77 User’s Manual
2.4 Installing a Memory Module
EAX-Q77 provides four (4) 240-pin DDR3 Dual In-Line Memory Module (DIMM) sockets
which support data transfer rates of 1333 and 1600 MT/sec. The total maximum memory
size is 32 GB.
Perform the following steps to install a memory module to the motherboard:
1. Press the retaining clips outwards.
2. Align a memory module on the slot taking note of the break on the module and the slot.
3. Insert the memory module completely until the retaining clips at both ends lock up and
the memory module is seated in place.
Note:
(1) Do not change any of the DDR3 DIMM parameters in BIOS setup without
acquiring technical information in advance.
(2) Static electricity can damage the electronic components of the computer or the
optional boards. Before starting these procedures, ensure that you are discharged
of static electricity by touching a grounded metal object briefly.