Avalue EMX-QM67 - Manual (Page 86)

EMX-QM67 User’s Manual
86 EMX-QM67 User’s Manual
 Primary IGFX Boot Display[VBIOS Default]
Select the display port which be activated during POST. This has no effect if external
graphics present.
Configuration options: [VBIOS Default] [CRT] [HDMI] [LFP] [DisplayPort]
 LCD Panel Type[VBIOS Default]
Select LCD panel type for LVDS port
Configuration options: [800x600] [1024x768] [1280x1024] [1400x1050] [1600x1200]
[1680x1050] [1600x900] [1280x800] [1280x600] [2048x1536] [1366x768]
 Panel Scaling[Auto]
Select the LCD panel scaling option used by the Internal Graphics Device.
Configuration options: [Auto][Off][Force Scaling]
 Backlight Control[PWM Inverted]
Backlight control setting.
Configuration options: [PWM Inverted] [PWM Normal] [GMBus Inverted] [GMBus Normal]
 BIA[Auto]
Auto: GMCH use VBT Default
Level n: Enabled with selected Aggressiveness level.
Configuration options: [Auto] [Disabled] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5]
 Spread Spectrum clock Chip[Off]
Hardware: Spectrum is controlled by Chip.
Software: Spectrum is controlled by BIOS.
Configuration options: [Off] [Hardware] [Software]
 ALS Support[Enable]
Valid only for ACPI.
Configuration options: [Disabled] [Enabled]
 Active LFP[Int-LVDS]
Select the active LFP configuration.
Configuration options: [No LVDS] [Int-LVDS] [eDP Port-A][eDP Port-D]
 Panel Color Depth[18 Bit]
Select the LFP panel color depth
Configuration options: [18 Bit] [24 Bit]