Avalue EBM-LX800 - Manual (Page 66)

EBM-LX800
66 EBM-LX800 User’s Manual
Type the password, up to eight characters in length, and press . The password
typed now will clear any previously entered password from CMOS memory. You will be
asked to confirm the password. Type the password again and press . You may also
press to abort the selection and not enter a password. To disable a password, just
press when you are prompted to enter the password. A message will confirm the
password will be disabled. Once the password is disabled, the system will boot and you can
enter Setup freely.