Avalue EBM-LX800 - Manual (Page 62)

EBM-LX800
62 EBM-LX800 User’s Manual
3.5.8 PnP / PCI Configuration
This section describes configuring the PCI bus system. PCI, or Personal Computer
I nterconnect, is a system which allows I/O devices to operate at speeds nearing the speed
the CPU itself uses when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that only experienced
users should make any changes to the default settings.
3.5.8.1 PNP OS Installed
The operation system environment is Plug-and-Play aware sets “YES”
The choices: No, Yes.
3.5.8.2 Init Display First
This item allows you to decide to active whether PCI Slot or AGP first.
The choices: PCI Slot, Onboard.
3.5.8.3 Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on and the
system reconfiguration has caused such a serious conflict that the operating system cannot
boot.
The choices: Disabled, Enabled.
3.5.8.4 Resources Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot
and Plug and Play compatible devices. However, this capability means absolutely nothing
unless you are using a Plug and Play operating system such as Windows
®95. If you set