beautypg.com

Heating in-between seasons, Chimney fire, The most important spares—overview – Austroflamm Lucy Cook User Manual

Page 9: Keramott, Other parts, Gaskets, Accessories, Cleaning, Important, Maintenance

background image

english

7

Lucy Cook

Heating in-between seasons

If you heat the stove in between seasons, when the
outside temperatures are higher, the flue gases may not
be able to escape completely and this may lead to
disturbances in the chimney draught, especially if the
temperatures are rising suddenly. The stove has to be
charged with less wood then and the primary air has to be
increased so that the wood can burn down faster (with
visible flames) and thus the chimney draught can
stabilize.

Chimney fire

A chimney fire may occur, due to sooting and deposits in
the chimney, if impropes or humid fuel is used. In case of
a chimney fire close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have an
expert inspect your chimney for cracks and air-tightness
after the burning out of the chimney.


4. THE MOST IMPORTANT SPARES—OVERVIEW

Keramott

Description

Nr. drawing Part number

Bottom Keramott left

1

717562

Bottom Keramott rear

2

717564

Bottom Keramott right

3

717563

Lateral Keramott front

4

717566

Lateral Keramott rear

5

717567

Rear Keramott

6

717565

Keramott baffle plate

7

717568

Keramott wood retainer

8

717561

Other parts

Description

Nr. drawing Part number

Door complete

9

717530

Door Handle

10

714800

Door glass

11

717535

Stove lacquer

--

650002

Glass cleaner ½ litre

--

640070

Gaskets

Description

Nr. drawing Part number

Round gasket

∅ 6 mm (1,5 m)

12

710696

Gasket 15 mm x 8 mm (1,2 m)

13

718571



Accessories

You can obtain floor plates of glass or steel or care products from your certified dealer.

IMPORTANT:

Have defective parts replaced by your certified dealer. This will guarantee that your stove

functions properly and safely.
The fireplace must not be attered.

Maintenance

To clean the glass, please use a specialised product such as Thermohit glass cleaner. Lacquered surfaces are to
be cleaned only with a cloth (may be damp). Special cleaning agents should also be used for stainless steel
surfaces.
Only gaskets in good order ensure the proper function of your stove!

Cleaning

The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if necessary
more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned regularly by the
chimneysweeper. Your chimneysweeper will inform you of the necessary inspection intervals. An expert should
inspect the stove annually.

order of Keramott installation acc. to numbering