Alwarerc ALware Arch-Bridge Landing Gear - Manual (Page 4)

Assembly Instruction:
Step 1.
Install 4pcs M2x4x39mm Alu Rods to the
Landing Gear frames using M2x4mm Hex
Cap Screws.
Step 2.
Insert 3pcs of Landing Gear Rid to each
side of Landing Gear Frame.
Step 3.
Install another Landing Gear Frame
together using M2x4mm Hex Cap Screws
to form a Landing Gear Assembly. Repeat
this step for another side of Landing Gear
Assembly.
Step 4.
Insert 6mm Fiber Glass Post to the end
hole of Landing Gear Frames.
www.alwarerc.com
Notice for assembly:
When installing metal to metal parts, little amount of Thread Lock must be applied for safety
reason.