Eset to factory defaults, Pgrade, 26 | p a g e – Altech UEC DSR 4639 User Manual
Page 26
26 |
P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
12.9.4
Press OK when the correct one has been selected
12.9.5
Press EXIT or right arrow to return to the main menu section.
12.10
R
ESET TO FACTORY DEFAULTS
12.10.1
Selecting Reset to factory defaults will erase all the changes made to the menu.
12.10.2
Enter the pin (1234) by pressing the number keys on the remote.
12.10.3
The set top box will reboot after a factory reset.
12.11
USB
U
PGRADE
12.11.1
Copy the upgrade image to a USB stick which is available from
The upgrade will be called “upgrade.uec”.
12.11.2
Insert the USB stick into the USB port at the back of the set top box
12.11.3
In the menu, high
light the “USB upgrade” option and press OK.
12.11.4
The set top box will reboot and apply the upgrade automatically
– it may take a
few minutes to complete.