Draytek VIGOR N61 User Manual
Page 26
Vigor N61 User’s Guide
26
wireless card.
Fragmentation
Threshold
Set the value for fragmentation threshold. The default value is
2346.
RTS Threshold
Set the value for RTS threshold. The default value is 2347.
Frequency
Please choose the wireless frequency for this card.
Ad-hoc Channel
Please choose one channel. It must match the channel set in AP.
Power Save Mode
To save the power, you can choose Max Save or Fast Save. The
default setting is Disable.
MaxSave – It can save lots of power. However, the wireless
signal also is bad.
FastSave- It is standard mode for power saving.
Disable – The power will not be saved. However, the wireless
signal will be better.
Tx Burst
Such function can increase the data transmission rate within a
short time. Choose Enable to activate the function, otherwise,
choose Disable to close the function.