Driver installation – ADLINK AmITX-BT-I User Manual
Page 37
AmITX-BT-I
Page 37
5. Driver Installation
The AmITX-BT-I drivers for Windows 7 (32-bit/64-bit) and Windows 8 (32-bit/64-bit) can be downloaded from the ADLINK website
(
Windows 7 32/64-bit
Chipset
\1.Chipset\Intel_Chipset_Device_Software_WinAllOS_v10.0.20\
\2.Graphic\Intel_HD_Graphics_Win7_32_v36.15.0.1091\
Display
\3.Graphic\Intel_HD_Graphics_Win7_64_v37.15.0.1091\
Audio
\4.Audio\Realtek_High_Definition_Audio_Win7_32_64_6.0.1.6410\
\5.LAN\WIN7\Intel_Gigabit_Network_Connection_Win7_32_v12.11.97.1\
LAN
\6.LAN\WIN7\Intel_Gigabit_Network_Connection_Win7_64_v12.7.28.0\
\7.IO\Intel_Processor_IO_Drivers_Win7_32_v2.0.msi\
IO
\8.IO\Intel_Processor_IO_Drivers_Win7_64_v2.0.msi\
USB 3.0
\9.USB3.0\Intel_USB 3.0_Host_Controller_Win7_32_64_v3.0.0.34
Windows 8 32/64-bit
Chipset
\1.Chipset\Intel_Chipset_Device_Software_WinAllOS_v10.0.20\
\2.Graphic\Intel_HD_Graphics_Win8_8.1_32_v15.33.19.3540\
Display
\3.Graphic\Intel_HD_Graphics_Win8_8.1_64_v15.33.19.64.3540\
MBI
\4.MBI\Intel_MBI_Device_Win8_8.1_32_64_v1.70.305.16316\
TXE
\5.TXE\Intel_TXE_Driver_Win8_32_64_v1.0.4.1089\
The driver installation procedure for Windows 7 32-bit is outlined below. Install the Windows operating system before installing any driver.
Most standard I/O device drivers are installed during Windows installation.
1.
Install the Chipset driver by running the program \1.Chipset\Intel_Chipset_Device_Software_WinAllOS_
v10.0.20\\SetupChipset.exe. Follow the instructions given and reboot when instructed.
2.
Install the Display driver and utilities by running the program \2. Graphic\Intel_HD_Graphics_Win7_32_
v36.15.0.1091\setup.exe. Follow the instructions given and reboot when instructed.
3.
Install the Audio driver by running the program \4.Audio\Realtek_High_Definition_Audio_Win7_32_64_6.0.1.6410\setup.exe.
Follow the instructions given and reboot if required.
4.
Install the LAN driver by running the program \5.LAN\WIN7\Intel_Gigabit_Network_Connection_Win7_32_v12.11.97.1\
Intel_Gigabit_Network_Connection_Win7_32_v12.11.97.1.exe. Follow the instructions given and reboot if required.
5.
Install the IO driver by running the program \7.IO\ Intel_Processor_IO_Drivers_Win7_32_v2.0.msi\Intel_Processor_IO_
Drivers_Win7_32_v2.0.msi. Follow the instructions given and reboot if required.
6.
Install the USB 3.0 driver by running the program \9.USB3.0\Intel_USB 3.0_Host_Controller_Win7_32_64_v3.0.0.34\
setup.exe. Follow the instructions given and reboot if required.