3 specifications, Specifications – ADLINK IMB-S90 User Manual
Page 15

Introduction
3
IMB-S90
1.3
Specifications
System
CPU
Intel
®
Xeon® (LGA2011)
• E5-2658, 2.1GHz, QPI 8GT/s, 20MB cache, 32nm, 95W TDP (8C)
• E5-2648L, 1.8GHz, QPI 8GT/s, 20MB cache, 32nm, 70W TDP (8C)
• E5-2658 v2, 2.4GHz, QPI 8GT/s, 25MB cache, 22nm, 95W TDP (10C)
• E5-2648L v2, 1.9GHz, QPI 8GT/s, 25MB cache, 22nm, 70W TDP (10C)
• E5-2640 v2, 2.0GHz, QPI 7.2GT/s, 20MB cache, 22nm, 95W TDP (8C)
• E5-2630 v2, 2.6GHz, QPI 7.2GT/s, 15MB cache, 22nm, 80W TDP (6C)
Chipset
Intel
®
C604 Chipset
Memory
Dual-channel DDR3 1600MHz for each CPU, 8x 240-pin DIMM
sockets, up to 128GB
ECC registered or non-ECC unbuffered DIMM support
BIOS
AMI in 64-Mbit SPI Flash
IPMI
• ASPEED AST2300 BMC
• IPMI support for Intelligent Platform Management Interface v.2.0
• AMI MegaRAC® Web GUI
• KVM/Media Redirection support
• Support for remote power-cycle, power-down, power-up and reset by
NIC1
• Serial over LAN (supported by rear I/O COM port)
• HW monitor: +12V,+5V,+3.3V, CPU voltage, CPU/Motherboard
temperature, CPU/System fan speed
• Watchdog Timer:1-65535 seconds software programmable, can
generate system reset
Operating
Systems
• Microsoft Windows Server 2008 R2 64-bit
• Microsoft Windows 7 64-bit
• Red Hat Enterprise Linux 6
Display
Graphics
BMC AST2300 built-in 64MB VRAM
VGA
Dsub-15 connector, up to 1920x1200 resolution @60 Hz
Ethernet
Controller
• Dual Intel® GbE I210-AT Controllers (NIC0 and NIC1)
• Supports Wake-On-LAN
Ports
Two RJ-45 Ethernet ports
I/O Interfaces