ADLINK Express-LPC - Manual (Page 44)

Express-LPC User’s Manual Page 44
8.3.4 IDE Configuration
IDE Configuration Settings
You can use this screen to select options for the IDE Configuration Settings. Use the up and
down < Arrow > keys to select an item. Use the < + > and < - > keys to change the value of
the selected option. A description of the selected item appears on the right side of the screen.
The settings are described on the following pages. An example of the IDE Configuration screen
is shown below.
ATA/IDE Configuration
This item specifies whether the IDE channels should be initialized in Compatible or
Enhanced mode of operation. The settings are Disabled, Compatible and Enhanced.
Legacy IDE Channels
When running in compatible mode, the SATA channel can be configured as a legacy IDE
channel. The location of the IDE channel is selectable.
Primary IDE Master/Slave, Secondary IDE Master/Slave
Select one of the hard disk drives to configure it. Press < Enter > to access its sub menu.