ADLINK Express-BASE6 - Manual (Page 33)

Page 33 Express-BASE6 User’s Manual
6.20 Other Jumper Settings
JP23/24: BIOS Selection
See 7.1 SPI Secondary BIOS on
page 34 for a detailed description.
JP23 JP24 Status
1-2 1-2 Module BIOS <<<<
2-3 1-2 Reserved
1-2 2-3 Carrier SPI BIOS
2-3 2-3 Reserved
1
2
3
Note: <<<< indicates default setting
JP4: Clear CMOS
To clear CMOS, shut down the power and short
pins 2 and 3 (shorts VBAT to ground).
Jumper Status
1-2 Normal <<<<
2-3 Clear CMOS
1
2
3
JP32: TPM Signal Jumper
Configuring the jumper to "ON" pulls the
TPM signal high and "OFF" does nothing
to the TPM signal. Dependent upon module's
design for the TPM signal.
Jumper Status
1-2 ON
2-3 OFF <<<<
1
2
3
JP17: RSVD
JP18: Super I/O
Enables/disables the Super IO. By default, the
Express-BASE6 enables the onboard
W83627DHG-PT Super I/O. To disable the
Onboard Super I/O, short pins 2-3 of Jumper JP18.
Jumper Status
1-2 Enable <<<<
2-3 Disable
1
2
3