ADLINK cExpress-HL - Manual (Page 8)

Page 8 cExpress-HL
2.4 Audio
¾ Integrated: Intel® HD Audio integrated in PCH QM87
¾ Codec: Realtek ALC886 on Express-BASE6
2.5 LAN
¾ Integrated: MAC integrated in SOC
¾ Intel PHY: Intel® Ethernet Controller i218LM
¾ Interface: 10/100/1000 GbE connection
2.6 Multi I/O and Storage
¾ Integrated: in SOC
¾ USB ports: 2 ports USB 3.0 (USB0,1) and 6 ports USB 2.0 (USB2,3,4,5,6,7)
¾ SATA ports: four ports SATA 6Gb/s
¾ GPIO: 4 GPO and 4 GPI with interrupt
2.7 Serial I/O on Module
¾ Chipset: Nuvoton NCT5104D
¾ Ports: two UARTs RX/TX only
¾ Console Redirection: selectable in BIOS over UART0 or UART1
2.8 TPM (Trusted Platform Module)
¾ Chipset: ATMEL AT97SC3204
¾ Type: TPM 1.2
2.9 SEMA Board Controller
¾ Type: ADLINK Smart Embedded Management Agent (SEMA)
¾ Supports:
• Voltage/Current monitoring
• Power sequence debug support
• AT/ATX mode control
• Logistics and Forensic information
• Flat Panel Control
• General Purpose I2C
• Failsafe BIOS (dual BIOS )
• Watchdog Timer and Fan Control
2.10 Debug
¾ 40-pin flat cable connector to be used with DB-40 debug module
Supports: BIOS POST code LED, BMC access, SPI BIOS flashing, power testpoints, debug LEDs
¾ 60-pin XDP header for ICE debug of CPU/chipset