2 auxiliary power cord, Auxiliary power cord – ADLINK cPCI-R6700 Series User Manual
Page 40

28
Getting Started
4.2
Auxiliary Power Cord
If required, install the Auxiliary Power Cord included in the pack-
age.
1. Locate the Auxiliary Power Cord (20 cm) in the package.
2. Connect the 6-pin power connector to the cPCI-R6700
RTM (CN8).
3. After the RTM is installed in the chassis (see “Installing
the cPCI-R6700” on page 29 below), connect either the
male or female 4-pin Molex connector to the power supply.
CAUTION:
Additional power supply must be supplied to the RTM using an
auxiliary power cord when the cPCI-R6700 is used with a CPU
blade that consumes over 50W of power or under extended
temperature conditions (>60°C).
To CN8 onboard
connector
To ATX
power supply
See also other documents in the category ADLINK Hardware:
- USB-1901 (84 pages)
- USB-1210 (54 pages)
- USB-2401 (60 pages)
- USB-7230 (50 pages)
- USB-2405 (56 pages)
- DAQe-2010 (92 pages)
- DAQe-2204 (100 pages)
- DAQe-2213 (94 pages)
- DAQe-2501 (74 pages)
- PXI-2010 (84 pages)
- PXI-2020 (60 pages)
- PXI-2501 (62 pages)
- cPCI-9116 (98 pages)
- ACL-8112 Series (94 pages)
- ACL-8112 Series (92 pages)
- ACL-8112 Series (93 pages)
- ACL-8216 (75 pages)
- ACL-8111 (61 pages)
- PCM-9112+ (10 pages)
- PCM-9112+ (94 pages)
- cPCI-6216V (47 pages)
- ACL-6126 (28 pages)
- ACL-6128A (40 pages)
- PCM-6308V+ (52 pages)
- PCM-6308V+ (4 pages)
- PCI-7444 (82 pages)
- PCI-7434 (48 pages)
- PCI-7234 (56 pages)
- PCI-7260 (66 pages)
- PCI-7258 (38 pages)
- PCI-7256 (48 pages)
- PCI-7250 (48 pages)
- LPCI-7250 (48 pages)
- PCI-7396 (65 pages)
- PCI-7296 (59 pages)
- PCI-8554 (67 pages)
- PCIe-7360 (94 pages)
- PCIe-7350 (86 pages)
- PCIe-7300A (114 pages)
- PCIe-7200 (51 pages)
- PCI-7300A (112 pages)
- PCI-7300A (83 pages)
- PCI-7200 (96 pages)
- cPCI-7300 (83 pages)
- cPCI-7300 (82 pages)