ADLINK cPCI-3E12 - Manual (Page 21)

Board Interfaces 9
cPCI-3E10
2.2 Connectors and Jumpers
RJ-45 Ethernet Connectors
On the cPCI-3E10, LAN1/2 correspond to "A/B", and LAN3/4 cor-
respond to "C/D". On the cPCI-3E12, LAN1/2 correspond to "C/D".
On the cPCI-R3E10 RTM, LAN1/2 correspond to "A/B".
Table 2-1: RJ-45 Pin Definitions
Table 2-2: LAN Status LED Definitions
Pin #
10BASE-T/
100BASE-TX
1000BASE-T
1 TX+ TRANS_ A/B/C/D_MDIP0
2 TX- TRANS_ A/B/C/D_MDIN0
3 RX+ TRANS_ A/B/C/D_MDIP1
4 — TRANS_ A/B/C/D_MDIP2
5 — TRANS_ A/B/C/D_MDIN2
6 RX- TRANS_ A/B/C/D_MDIN1
7 — TRANS_ A/B/C/D_MDIP3
8 — TRANS_ A/B/C/D_MDIN3
Status
Speed LED
(Green/Orange)
Activity LED
(Yellow)
Network link is not established
or system powered off
OFF OFF
10 Mbps
Link OFF ON
Active OFF Blinking
100 Mbps
Link Green ON
Active Green Blinking
1000 Mbps
Link Orange ON
Active Orange Blinking
Activity Speed
1 8