1 introduction, 1 overview, 2 features – ADLINK XMC-E540 User Manual
Page 13: Chapter 1, introduction, Overview, Features, 1introduction
Introduction
1
XMC-E540
1
Introduction
1.1
Overview
The XMC-E540 is a dual-port 10GBASE-T Ethernet XMC module
with equipped with an Inte® Ethernet Controller X540. Featured
are dual RJ-45 copper ports supporting 10G/1000/100BASE-T
with auto-negotiation, jumbo frames up to 15.5KB, TCP/UDP seg-
mentation, IPv6 IP/TCP, IP/UDP receive checksum offload, FCoE
Tx/Rx CRC offload, and 256KB FCoE transmit segmentation. The
XMC-E540 is compliant with the VITA 42.3-2006 XMC PCI
Express Protocol Layer Standard.
1.2
Features
X
Compliant with VITA 42.3 XMC standard with XMC.3 con-
nector
X
Dual-port Intel® 10Gigabit Ethernet Controller X540-AT2
X
10G/1G/100Mbps copper PHYs integrated on-chip
X
Jumbo frames up to 15.5KB
X
TCP/UDP segmentation, IPv6 IP/TCP, IP/UDP receive
checksum offload
X
FCoE Tx/Rx CRC offload, 256KB FCoE transmit segmenta-
tion
X
Compliant with PCI Express Base Specification Rev. 2.1
(5GT/s)
X
Compatible with PCIe x1, x2, x4, x8 lanes
X
Dual RJ-45 copper ports
X
Backward compatible with 1000BASE-T by auto-negotiation
X
Preboot Execution Environment (PXE) support