ADLINK CT-6530 - Manual (Page 18)

6 Specifications
Serial Ports • Up to three serial ports
• One RS-232/422/485 serial port on front panel (cPCI-6530V)
• Up to two RS-232/422/485 COM port routed to RTM
USB 2.0 • One USB 2.0 port on front panel
• Up to six USB 2.0 ports routed to rear transition module
USB 3.0 • One USB 3.0 for cPCI-6530 version, additional one USB 3.0
for cPCI-6530V version
PMC/XMC • One 64-bit/33,66,133 MHz PMC site or PCIe x8 Gen 2 XMC
site for cPCI-6530V version with rear I/O
• Two 64-bit/33,66,133 MHz PMC sites or PCIe x8 Gen 2 XMC
sites on cPCI-6530 version
Audio • High definition audio routed to rear
TPM Atmel AT97SC3204 TPM (upon request) supporting:
• Over/Under voltage detection
• Low/High frequency sensor/filter
• Reset filter
• Memory encryption/decryption
Storage
Interfaces
1
• One mSATA slot
• One onboard 2.5” SATA connector supporting SATA 6Gb/s
drive on cPCI-6530V
• Optional CFast socket by adapter board on cPCI-6530
(space shared with 2.5” SATA drive)
• One SATA 7-pin 3Gb/s connector onboard
• Three SATA 3Gb/s channels routed to RTM
BIOS • AMI® EFI BIOS, 64Mbit SPI flash memory, supports
Configurable TDP (can be set as Nominal and Down)
Faceplate I/O cPCI-6530V (4HP)
• 2x 10/100/1000BASE-T Ethernet ports
• 1x DVI-I port
• 2x USB 3.0 ports
• 1x USB 2.0 port
• 1x RJ-45 serial port
• 1x PMC/XMC slot
cPCI-6530 (4HP)
• 2x 10/100/1000BASE-T Ethernet ports
• 1x USB 3.0 ports
• 1x USB 2.0 port
• 2x PMC/XMC slots
Table 2-1: cPCI-6530 Processor Blade Specifications