ADLINK CT-31 - Manual (Page 17)

Specifications 5
CT-31
2 Specifications
2.1 CT-31 Specifications
CompactPCI®
Standards • PICMG® 2.0 CompactPCI® Rev. 3.0
• PICMG® 2.1 Hot Swap Specification Rev.2.0
Mechanical • Standard 3U CompactPCI®
• Board size: 100mm x 160mm
• Single-slot (4HP, 20.32mm)
• CompactPCI® connectors with J1, J2
Processor • µFC-BGA Intel® Atom™ Processor N450
1.66GHz, 512KB L2 cache, TDP 5.5W
• µFC-BGA dual-core Intel® Atom™ Processor D510
1.66GHz, 1MB L2 cache, TDP 13W
Chipset • Intel® ICH8M I/O Controller Hub (ICH)
Memory • Single channel unbuffered non-ECC memory soldered
onboard, up to 2GB capacity (dependent on memory
process technology)
• DDR2-667 for N450 processor, DDR2-800 for D510
processors
CompactPCI
Bus • PCI 32bit/ 33MHz; 3.3V, 5V universal V(I/O)
• Supports operation in system slot only
Gigabit
Ethernet • Two PCI-Express x1 Intel® 82574L GbE controllers
• Two 10/100/1000BASE-T ports to J2 (RTM)
Graphics • Integrated in Intel® Atom™ Processor
• VGA port to J2 (RTM)
• Analog monitor support up to QXGA 2048x1536 @60Hz
32-bit
Serial Ports • Two 16C550 compatible serial ports from Super I/O IT8783
to J2 (RTM)
BIOS • AMIBIOS8® 16Mbit SPI flash memory
Onboard
Interfaces CT-31:
• EIDE CompactFlash slot
cPCI-R3610T:
• 2x 7-pin SATA ports
• 2x 10-pin RS-232/422/485(+) box headers (connected to
Faceplate I/O)