ADLINK ND-6024 - Manual (Page 44)

38 • Command Set
3.14 Save Power On Analog Output Value
@Description
Save the current output value to the non-volatile register for NuDAM
analog output module. The power on value be put on the output channel
when system power ON.
@Syntax
$(Addr)4
$ Command leading code. (1-character)
(Addr) Address ID. (2-character)
4
Function code of saving power on analog value.
(1-character)
@Response
!(Addr)
or
?(Addr)
! Command is valid.
? Command is invalid.
(Addr) Address ID.
@Example
User command: $064
Response: !06
Save the current analog output value as the default value when the analog
output module start-up.