ADLINK ND-6024 - Manual (Page 42)

36 • Command Set
3.12 20mA Calibration
@Description
Stores the current output value as 20 mA reference at the specified analog
output module. (only 6021)
@Syntax
$(Addr)1
$ Command leading code (1 character)
(Addr) Address ID (2 characters)
1 Function Code, 20 mA calibration (1 character)
@Response
!(Addr)
or
?(Addr)
! Command is valid.
? Command is invalid.
(Addr) Address ID.
@Example
User command: $061
Response: !06
To perform the 20 mA calibration for analog input module at address ID
06H.
Note : Analog output module should be trimmed to the correct value by “Trim
Calibration” command before to execute “20 mA Calibration”. Refers
to Chapter 5 “Analog Output Calibration” for details .