ADLINK HSL-DI32-M-N/HSL-DI32-M-P - Manual (Page 76)

HSL Slave Module 63
Example 2
Provided you installed two HSL-DI16DO16-UJ, one HSL-
DI16DO16-M-NN, two HSL-DO32-M-N, one HSL-AI16AO2-VV,
and two HSL-4XMO-CG-N with all slave modules in full duplex
mode, you can have the following conditions:
Condition 1: The HSL-AI16AO2-VV and two HSL-4XMO-CG-
N operate in 6 Mbps.
We recommended that you use the provided slave index con-
figuration.
The scan time needs 30.33µ x 17 at 6 Mbps, full duplex mode.
You can connect these modules with one master controller.
Condition 2: An HSL-AI16AO2-VV and two HSL-4XMO-CG-N
modules operate at 12 Mbps.
We recommended that you use the provided slave index con-
figuration.
The scan time needs 30.33µs x 7. You may connect these
modules with one master controller. The HSL-AI16AO2-M-VV
Item DIP Switch Index Occupation in HSL
HSL-4XMO-CG-N #1 1 1, 3, 5, 7
HSL-4XMO-CG-N #2 2 2, 4, 6, 8
HSL-DO32-M-N #1 9 9, 10
HSL-DO32-M-N #2 11 11, 12
HSL-AI16AO2M-VV 13 13, 15
HSL-DI16DO16-UJ #1 14 14
HSL-DI16DO16-UJ #2 16 16
HSL-DI16DO16-M-NN 17 17
Group 1 DIP Switch Index Occupation in HSL
HSL-DO32-M-N #1 1 1, 2
HSL-DO32-M-N #2 3 3, 4
HSL-DI16DO16-UJ #1 5 5
HSL-DI16DO16-UJ #2 6 6
HSL-DI16DO16-M-NN 7 7