SoundMax SM-CMD2022 - Manual (Page 7)

7
3. Insert the supplied release keys into the both sides of the unit body to click, as shown in
the picture. To extract the unit from the dashboard, pull the release keys or the unit
body to pull it out. Before detaching the unit, ensure it is not fixed with the metal strap.
Trim frame installation
To install the trim frame, press it to the unit body and push it to fix it in place. This should
be done before installing the front panel; otherwise you are not able to install the trim
frame. When the trim frame being installed, the side with the groove should face down and
fixed first.
2. DIN REAR-MOUNT (Method B)
For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the
help of the factory radio mounting brackets.
1. Select a position in which the screw holes of the
brackets (3) are aligned with the screw holes in the unit
body, and screw in two screws (2) in each side.
2. Screw.
3. Factory radio mounting brackets.
4. Vehicle dashboard.
5. Lock (remove this part).
Note: The outer trim frame and mounting sleeve are not used for method of installation.