SoundMax SM-CMD2022 - Manual (Page 20)

20
APS (Auto memory store/ Preset scan) function
Preset scan: press APS button on the panel or AMS/RPT button on the RC to scan all
preset stations in the memory of the current band and stay on each memory stations for
several seconds. To stop preset scan, press this button again. To listen to saved station
press 1-6 buttons.
Auto memory store: press and hold APS button on the panel or AMS/RPT button on
the RC to enter auto store mode. The radio will automatically store 6 strongest available
stations to the 6 preset memories of the current band. To stop auto store, press this
button again.
Stereo/Mono mode
Press ST/PROG button on the RC to select ST ON (stereo) or ST OFF (mono). Or press
repeatedly SEL button until ST ON/OFF is selected, then rotate VOL knob or press VOL+/-
buttons on the RC to select ST ON or ST OFF.
Local/Distant reception
Press LOC/RDM button on the RC to select LOC ON or LOC OFF mode.
Or press repeatedly SEL button until LOC ON/OFF is selected, then rotate VOL knob or press
VOL+/- buttons on the RC to select LOC ON or LOC OFF mode.
Local and distance reception setting can facilitate the radio reception, depending on the
location in which the radio is being used.
AF (Alternative Frequencies) function
Press AF button on the panel to turn the AF function on or off. When on, the AF icon will be
displayed.
When the radio signal strength is poor, enabling the AF function will allow the unit to
automatically search another station with the same PI (Program Identification) as the
current station but with stronger signal strength.