Denon DP-29F - Manual (Page 5)

ENGLISH
5
Thank you very much for purchasing the DENON fully automatic turn-
table system.
Please read the operating instructions thoroughly in order to acquaint
yourself with the turntable system and achieve maximum satis-
faction from it.
Please check to make sure the following items are included with
the main unit in the carton:
(1) Operating instructions (these instructions) …………………1
(2) Service station list ………………………………………………1
(3) Platter ……………………………………………………………1
(4) Rubber mat ………………………………………………………1
(5) 45 rpm adaptor …………………………………………………1
z
Precautions …………………………………………………………5
x Before using the turntable …………………………………………6
c
Connections …………………………………………………………7
v Controls ………………………………………………………………8
b Record playback ……………………………………………………8, 9
n
Operation details ……………………………………………………9
m Troubleshooting ……………………………………………………10
,
Specifications ………………………………………………………10
– TABLE OF CONTENTS –
1 PRECAUTIONS
Power requirements
Power requirements for electrical equipment differ from area
to area. Please ensure that your machine meets the power
requirements in your area.
If it doubt, consult a qualified electrician.
About the power switch
This turntable is not equipped with a primary power switch.
The power switch is incorporated in the tone arm of the
turntable. The power to the turntable is cut when the tone arm
returns to the tone arm rest. Note however, that the power is
not completely turned off in this case. If you wish to
completely turn the power off, disconnect the power cord
from the household AC outlet.
What you should know to protect yourself
• Never touch the plug with wet hands.
• Always pull out by the plug and never the cord.
• Only let a qualified professional repair or reassemble the turntable.
An unauthorized person might touch the internal parts and receive
a serious electric shock.
• Never allow a child to put anything, especially metal, into the
turntable.
Protect the turntable too
• Use only a household AC power source. Never use a DC power
source.
• If water is spilled on the turntable, disconnect it and call your
dealer.
• Make sure that the turntable is well ventilated and away from
direct sunlight.
• To avoid damage to the internal circuits and the external surface,
keep it away from heat (stoves, etc.).
• Avoid using spray type insecticide near the turntable it can damage
the finish and might ignite suddenly.
• To avoid damaging the finish, never use paint thinner or other
similar chemicals to clean the turntable.
• Place the turntable on a flat and solid surface.
• If you don’t plan to use the turntable for a long period of time,
disconnect the power cord.
• To protect the insulators, always lift the turntable when you move
it. And before moving the turntable, disconnect all the connecting
cables.
• When transporting the turntable over a long distance, place it in its
original box wrapped in protective wrappers.