Acrosser AR-B7290 - Manual (Page 56)

AR-B7290
56
2.2.2.8 Securit y Option
This category determines whether the password is required when the sys- tem boots up or
only when entering setup. The options are:
Item Description
System
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
Setup
The system will boot, but access to Setup will be denied if the correct
password is not entered at the prompt.
To disable security, select PASSWORD SETTING at Main Menu and
then you will be asked to enter password. Do not type anything and
just press , it will disable security. Once the security is
disabled, the system will boot and you can enter Setup freely.
2.2.2.9 APIC Mode
This setting allows you to enable the APIC mode. The choices are “Disabled” or “Enabled.”