Acrosser AR-B5230 - Manual (Page 24)

AR-B5230 Series User Manual
3.4 PnP/PCI Setup
Option Choice Description
Reset
Configuration Data
Enabled
Disabled
Normally, you leave this field Disabled. Select
Enabled to reset Extended System Configuration
Data (ESCD) when you exit Setup. If you have
installed a new add-on and the system
reconfiguration has caused such a serious conflict,
then the operating system can not boot.
Resources
Controlled By
Auto(ESCD)
Manual
The Award Plug and Play BIOS has the capacity to
automatically configure all of the boot and Plug and
Play compatible devices. However, this capability
means absolutely nothing unless you are using a
Plug and Play operating system such as Windows
95. If you set this field to “manual,” then you may
choose specific resources by going into each of the
submenus.
IRQ Resources N/A
When resources are controlled manually, assign a
type to each system interrupt,depending on the type
of the device that uses the interrupt
24