Acrosser AR-B7230 - Manual (Page 30)

AR-B7230 User’s Manual
30
Exit Without Saving
Pressing on this item
for confirmation:
Quit without saving (Y/N)?
Y
This allows you to exit Setup
without storing any changes in
CMOS. The previous selections
remain in effect. This shall exit the
Setup utility and restart your
computer.
Set Password
Pressing on this item
for confirmation:
ENTER PASSWORD:
When a password has been
enabled, you will be prompted to
enter your password every time
you try to enter Setup. This
prevents unauthorized persons
from changing any part of your
system configuration.
Type the password, up to eight
characters in length, and press
. The password typed now
will clear any previous password
from the CMOS memory. You will be
asked to confirm the password. Type
the password again and press
. You may also press
to abort the selection and not enter a
password.
To disable a password, just press
when you are prompted to
enter the password. A message will
confirm that the password will be
disabled. Once the password is
disabled, the system will boot and
you can enter Setup freely.