Acrosser AR-B1320 User Manual
Page 47
A
A
R
R
-
-
B
B
1
1
3
3
2
2
0
0
U
U
s
s
e
e
r
r
’
’
s
s
G
G
u
u
i
i
d
d
e
e
4-9
4.5 PERIPHERAL SETUP
This section is used to configure the peripheral features.
Figure 4-5 BIOS: Peripheral Setup
Hard Disk Delay
If this option is set to Disabled and the system BIOS executes too fast, the result is that the BIOS can’ t
find the hard disk drive. Therefore, it is recommended to select a hard disk delay period to prevent the
BIOS from executing too fast.
Available options: 3 Sec, 5 Sec, 10 Sec, 15 Sec.
OnBoard Primary IDE
This option specifies the onboard IDE controller channels that will be used.
Available options: Enabled, Disabled
OnBoard FDC
This option enables the floppy drive controller on the AR-B1320.
Available options: Enabled, Disabled
OnBoard Serial Port1
This option enables the serial port on the AR-B1320.
Available options: Disabled, 3F8h, 2F8h, 3E8h, 2E8h
OnBoard Serial Port1 IRQ
This option selects the IRQ for the onboard serial port1.
Available options: 3, 4, 5, 9
OnBoard Serial Port2
This option enables the serial port2 on the AR-B1320.
Available options: Disabled, 3F8h, 2F8h, 3E8h, 2E8h