Bios console, 1 bios setup overview – Acrosser AR-B1690 User Manual
Page 25
AR-B1690 User’s Guide
25
5. BIOS CONSOLE
This chapter describes the AR-B1690 BIOS menu displays and explains how to perform common tasks needed to
get up and running, and presents detailed explanations of the elements found in each of the BIOS menus. The
following topics are covered:
z
BIOS Setup Overview
z
Standard CMOS Setup
z
Advanced CMOS Setup
z
Advanced Chipset Setup
z Power
Management
z PCI/Plug
and
Play
z Peripheral
Setup
z
Auto-Detect Hard Disks
z Password
Setting
z
Load Default Setting
z BIOS
Exit
5.1 BIOS SETUP OVERVIEW
The BIOS is a program used to initialize and set up the I/O system of the computer, which includes the ISA bus
and connected devices such as the video display, diskette drive, and the keyboard.
The BIOS provides a menu-based interface to the console subsystem. The console subsystem contains special
software, called firmware that interacts directly with the hardware components and facilitates interaction between
the system hardware and the operating system.
The BIOS default values ensure that the system will function at its normal capability. In the worst situation the user
may have corrupted the original settings set by the manufacturer.
After the computer is turned on, the BIOS will perform diagnostics on the system and display the size of the
memory that is being tested. Press the [Del] key to enter the BIOS Setup program, and then the main menu will
show on the screen.
The BIOS Setup main menu includes some options. Use the [Up/Down] arrow key to highlight the option that you
wish to modify, and then press the [Enter] key to select the option and configure the functions.
Setup Main Menu
CAUTION:
1. AR-B1690 BIOS the factory-default setting is used to the
recommends using the BIOS default setting, unless you are very familiar with the setting function, or you can
contact the technical support engineer.
2. If the BIOS settings are lost, the CMOS will detect the
operation system, this option will reduce the performance of the system. Acrosser recommends choosing the
optimize system performance.
3. The BIOS settings are described in detail in this section.