17 cpu setting system bus clock (sw1), 18 compact flash connector (cf1), 19 cd in connector (cd1) – Acrosser AR-B1690 User Manual
Page 17: 20 cpu fan power connector (fan1, fan2)
AR-B1690 User’s Guide
17
2.2.17 CPU Setting System Bus Clock (SW1)
The table below shows the correct setting to match the CPU frequency.
OFF
1
2 3 4
1
2
3
4
CPU
PCI
OFF OFF OFF OFF 133
33.3
ON OFF OFF OFF 124
31
OFF ON OFF OFF 150
37.5
ON ON OFF OFF 140
35
OFF OFF ON OFF 105
35
ON OFF ON OFF 110
36.6
OFF ON ON OFF 115
38.3
ON ON ON OFF 120
40
OFF OFF OFF ON 100
33.3
ON OFF OFF ON 133
44.3
OFF ON OFF ON 112
37.3
ON ON OFF ON 103
34.3
OFF
OFF ON ON 66 33
(Factory
Preset)
ON OFF ON ON
83
41.6
OFF ON ON ON 75
37.5
ON ON ON ON 124
41.3
2.2.18 Compact Flash Connector (CF1)
Caution:
Please avoid using Compact Flash Card and Secondary Devices (IDE2), Such as CD/DVD-ROM, HDD
or CD/DVD-writer, at the same time because CF Card and Secondary connector (IDE2) use the same as I/O
address on the motherboard, it will cause hardware conflict or it will cause hardware crash.
2.2.19 CD IN Connector (CD1)
1 2 3 4
2.3.GND
1.CDINL
4.CDINR
2.2.20 CPU Fan Power Connector (FAN1, FAN2)
FAN1 and FAN2 are 3-pin header for the CPU fan. The fan must be a 12V fan.
2
5
4
1
3
1. GND
2. +12V
3. Fan
Speed