7 peripheral setup, Onboard fdc, Onboard serial port – Acrosser AR-B1651 User Manual
Page 25: Ir port support, Onboard parallel port, Parallel port mode, Parallel port dma channel, Onboard ide, Onboard ac’97 audio
AR-B1651 User’s Guide
25
5.7 PERIPHERAL SETUP
This section is used to configure peripheral features.
Peripheral Setup
OnBoard FDC
This option enables the floppy drive controller on the AR-B1651.
OnBoard Serial Port
This option enables the serial port on the AR-B1651.
IR Port support
This item is to activate the function of Infra-red.
OnBoard Parallel Port
This option enables the parallel port on the AR-B1651.
Parallel Port Mode
This option specifies the parallel port mode. ECP and EPP are both bi-directional data transfer schemes that
adhere to the IEEE 284 specifications.
Parallel Port DMA Channel
This option is only available if the setting for the parallel Port Mode option is ECP.
OnBoard IDE
This option is to set up the operating mode of IDE controller. If the main board offers the enhanced I/O port, the
choice should be <
Enabled
>.
OnBoard AC’97 Audio
This item allows you to decide to Enabled, Disabled the AC’97 Audio.