Acrosser AR-B1893 User Manual
Page 28
AR-B1893 User’s Guide
AR-B11893 Pentium M inside (With VGA)
with On Board DDR, 4 Port built in LAN, 1 Mini PCI, 1 CF
28
Swap Floppy Drive
If the system has two floppy drives, choose enable to assign physical
drive B to logical drive A & vice Versa.
The Choice: Enabled, Disabled.
USB Keyboard Support
This item allows you to enable or disable USB keyboard support.
The Choice: Enabled, Disabled.
Init Display First
This item allows you to choose which Display to be first detected.
The Choice: PCI Slot, On Board / AGP.
Boot Display
This item allows you to choose display interface
.
The Choice: Vbios default, CRT, EFP, TV, CRT + EFP, CRT + TV.
On-Chip Frame Buffer Size
This item allows you to Choose the Frame Buffer size for Display.
The Choice: 1MB, 4MB, 8MB, 16MB, 32MB.
ACPI Function
This item allows you to enable or disable
Advanced Configuration and
Power Management (
ACPI) function.
The Choice: Enabled, Disabled.
ACPI Suspend Type
This item allows you to Choose Suspend Type for ACPI function.
The Choice: S1(Pos), S3(STR), S1 & S3.
Power Supply Type
This item allows you to choose the Type of Power Supply in use.
The Choice: AT, ATX.
PWRON After Power-Fail
This item allows you to choose the Option of Power Status after Power
Fail by ATX Power Supply.
The Choice: Former-STS, On, Off.