Acrosser AR-R5800A - Manual (Page 5)

AR-B5800A User Manual
1.1 Specifications
1.1 Specifications
CPU: a LGA775 socket for Intel Core2 Processors in the 775-Land LGA package.
DMA channels: 7.
Interrupt levels: 16 (24 APIC interrupts).
Chipset: Intel G41 express chipset 82G41 + 82801GR + W83627DHG-P.
Memory: provides two 240-pin DIMM sockets to support DDRIII 1066 non-ECC DIMM. The
memory capability can up to 2GB.
VGA Controller: G41 GMCH integrated.
Analog Display Interface: 10-pin box header, and resolution up to 2048x1536@75Hz.
Serial ATA Interface: supports Two SATA devices, and data transfer rates up to 300MB/s per
device.
Compact flash interface: supports TYPE-II compact flash card with UDMA supported.
USB2.0 interface: one stacked USB connector and two 10-pin pin header to support Six
USB2.0 compatible devices. All resettable fuses protected.
Ethernet interface: on-board six PCI express gigabit Ethernet controllers and two PCI gigabit Ethernet
controllers to support eight LAN ports. Dual Gigabit Optical fiber Ethernet Intel 82575EB PCI express LAN
chip with SFP connectors (Optical A /optical B) , They provide a standard IEEE 802.3 Ethernet interface for
1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u, and 802.3ab,
respectively).
BYPASS function: supports by ports LAN1 & LAN2 , LAN3 & LAN4 software programmable.
Serial ports (RS232): One high-speed 16550 compatible UARTs ports with 16-byte
send/receive FIFOs.
COM1: RJ45 connector.
LCM interface: a 7-pin pin header could be used to LCM for chassis＇ control panel.
General Purpose Input/Output: 8-bit, 3.3V TTL level, bidirectional, and software
programmable GPIOs.
WATCHDOG: software programmable 1~255 second(s) / minute(s).
Power Consumption:
+12V [5.3A], +5V [3.5A], +3.3V [1.8A], -12V [0.9A], +5Vsb [0.8A]
typically.
Test equipments list as below:
Main board: AR-B5800A
Processor: Intel Pentium Processor E6500 2.93GHz / FSB1066 / 2MB
5